Filter
Top Products
Using your fax machine
19
2
When the page that is being sent has gone
through, the other person’s telephone will
ring and if they pick up, your handset will
then ring.
3 Answer the handset as normal and speak.
If the person you are sending the fax to wants to
speak to you while the document is being faxed to
them, your handset will ring - answer as normal.
Receiving a fax
You can set your DECTfax to print faxes as they
are received or incoming faxes can be stored in
the memory, up to 20 Slerexe* pages, and
printed out at a later date. The default setting is
for memory receive to be switched on.
To switch off memory receive
When memory receive is off, you must ensure
paper is in the sheet feeder.
1 Press Function then 3 then 6. The display
shows 36 RX IN MEM.
2 Press Function. The display shows two
options:
YES
Incoming faxes are stored in the
memory, even if there is paper in
the sheet feeder. This is the
default setting.
NO Incoming faxes are printed as
they are received. If there is no
paper in the sheet feeder, the
faxes are stored in the memory.
3 Use the ᮤ and ᮣ buttons to select NO. Press
Function to confirm the change.
To print out received faxes
When you have faxes stored in the memory
the
Fax button light will flash. You can print in
normal mode or economy mode.
Normal
• Make sure you have paper in the sheet
feeder. Press the
Fax button. The stored
faxes will print out.
Economy
This allows you to print out messages reduced
by 50% vertically so that two pages fit onto one
A4 printout.
D
E
F
3
M
N
O
6
* Slerexe is the name for the standard fax page.
If you answer a call on a telephone that is on the
same line as the DECTfax, and the call is a fax, you
activate the DECTfax by pressing # then 7 on the
telephone keypad then hanging up the telephone
when you hear the tones from the DECTfax.