Filter
Top Products
Using your handset
27
4
To end the call, press the TALK button.
You can dial the number before pressing the
TALK button:
1 Dial the number you want to call.
Use the
CLR button to delete numbers to
make sure you don’t dial a wrong number.
2 Press the TALK button. The number entered
is dialled after a few seconds.
To receive a call
1 When your handset rings press the TALK
button.
2 Press the TALK button to hang up after the
call is over.
Answering mode
When the handset is on the charger you can
set it to answer and finish calls in two ways. In
mode 0 you must always press the
TALK
button to receive and finish the call; in mode 1
you simply lift the handset to receive the call
and replace it to finish the call.
To choose the mode
1 Press OK. The display shows F (function).
Then press
8. The display shows F8 and the
current mode setting (0 or 1).
2 Use the ▲ or the ▼ button to change the
mode.
3 Press OK to confirm your choice. The
handset beeps.
Earpiece volume
To adjust the volume in the earpiece
1 During a phone conversation, press ▲ to
increase the volume and
▼ to decrease it.
If you hear beeping from the handset while you are
using it, it means that the battery is running low
and needs charging.
If you hear fax tones when you answer the handset
pressing # then 7 will automatically transfer the
signal to the fax machine.
T
U
V
8