Filter
Top Products
Sending a Fax 23
BASIC USE
Automatic and Manual Fax Redial
Automatic Fax Redial: If you are sending a fax automatically and the line is busy, the machine will
automatically redial up to 4 times at 2 minute intervals.
Manual Fax Redial: Place the document to be re-sent and press Redial/Pause and then Fax Start
to make a second call to the last number dialled.
Broadcasting
Using the numbers you have stored in Groups, One Touch and Speed Dial memory, you can
“Broadcast” faxes automatically to a maximum of 112 different locations in a few simple steps.
After the Broadcast is completed, a Broadcast Report will be printed automatically to let you know
the results.
1
Insert the document face down in the ADF.
2
Press Memory/Reports. The screen displays how much memory is available.
3
Enter the One Touch and Speed Dial numbers, Search numbers or a Group number you have
stored (one after the other).
4
Press Fax Start. The FAX stores the document in memory, and then transmits it to all the
numbers you entered. If the line is busy, your machine will redial.
Press Stop/Exit during transmission to cancel the current fax Broadcast.
To cancel all locations, press Menu/Set, 4. (See Cancelling a Scheduled Job,
page 41.)