Filter
Top Products
CHAPTER 6 TROUBLESHOOTING
6-49
9.7 Windows 95/98 (or later) Peer to Peer (HP JetAdmin Compatible Method)
Troubleshooting
If you are having trouble printing on a Windows 95/98 (or later) Peer to Peer network, check
the following (HP JetAdmin compatible method):
(1) If the print server does not show up under JetAdmin on a Windows 95/98 Peer to Peer
network, try removing all of the Windows 95/98 network software from the Network
Control panel and then reinstalling them as follows:
• First install the IPX/SPX-Compatible Protocol (or the TCP/IP protocol if you are using a
later version of JetAdmin), the Client for Microsoft Networks, and the network adapter
card driver.
• Install the Latest HP JetAdmin software
• Restart the system, and then add the HP JetAdmin service.
9.8 Windows 95/98/NT 4.0 Peer to Peer Print (NetBIOS) Troubleshooting
If you are having trouble printing on a Windows 95/98/NT 4.0 (or later) Peer to Peer network
(NetBIOS), check the following:
(1) Make sure that the Brother NetBIOS Port driver is securely installed and configured
according to the Windows 95/98/NT 4.0 Peer to Peer (NetBIOS) chapters. You may find
that during the installation of the port driver, the screen that prompts you for a Port name
is not displayed. This happens on some Windows 95/98/NT 4.0 computers. Press the
ALT and TAB keys to make it appear.
(2) Make sure that the print server is configured to be in the same workgroup or domain as
the test of your computers. It may take several minutes for the print server to appear in
the network neighborhood.
9.9 Internet Print (TCP/IP) Troubleshooting
(1) The first step in troubleshooting is to make sure that you have a valid E-mail connection
on both the sending PC and the receiving print server. Try sending an E-mail message
from the PC to a user at the remote site who can receive mail via the POP3 server. If this
does not work, there may be an E-mail configuration problem on the PC, on the local E-
mail server, or on the remote POP3 server. Double check to make sure that the E-mail
parameters that you configured on the PC and on the remote print server match those
that are configured on the E-mail servers.
(2) If you can print small files OK but are having problems printing large files, the problem
may be in the e-mail system. Some E-mail systems have difficulties printing large files. If
the file does not reach its destination intact, then the problem is with the E-mail system.
(3) You can also enable the partial e-mail print facility on your client PC, this will split the e-
mail up into fragments which should then not overwhelm your e-mail server. To do this,
select the property dialog of the Brother Internet Print Port.