Filter
Top Products
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-6
(5) Keeping the paper cassette upside down, release the pressure roller holder assembly
from the cassette by releasing the metal mounting plate from the plastic retaining boss.
Use a flat screwdriver to press the metal plate forwards until it clears the boss and then
remove the pressure roller holder assembly downwards from the cassette.
(6) Remove the cassette pressure roller from the assembly, then remove the pressure roller
shaft from the pressure roller.
(7) Remove the sponge holder ASSY from the holder. The two sponge holder springs will
also come off.
Fig. 4-7
(8) Keeping the paper cassette upside down, remove the two M2.6x5 Taptite screws.
(9) Unhook the catches of each side guide, then press the lock lever towards the front of the
cassette to release the pressure plate.
Fig. 4-8
Cassette pressure roller
Pressure roller holder
Paper cassette
Taptite, cup M2.6x5
Taptite, cup M2.6x5
Side guide rack
Pressure roller shaft
(catches)
Sponge holder ASSY
Lock lever
Sponge holder springs
Paper cassette
(Back side)
Pressure roller holder
Flat screwdriver
Step (9)
Side guide L
Side guide rack
Side guide L