Brother HL-5270DN Printer User Manual


 
4. Control Panel
48
Buttons
You can control the basic printer operations and change various printer settings with seven buttons (Go,
Job Cancel, Reprint, +, -, Back, Set).
Go
Pressing Go will exit the control panel menu and return the printer to the Ready state, however, if there is an
ERROR indication, the control panel will only change when the error is cleared.
You can pause printing by pressing Go. Pressing Go again restarts the print job. During a pause, the printer
is offline.
Note
If the printer is in PAUSE mode and you do not want to print the data left, press Job Cancel. Once the job
has been cancelled, the printer will return to the READY state.
Job Cancel
You can cancel the processing or printing of data by pressing Job Cancel. The LCD shows
JOB CANCELLING until the job is cancelled. After cancelling the job, the printer returns to the READY state.
When the printer is not receiving data or printing, the LCD shows No Data!!! and you cannot cancel the
job.
If you press Job Cancel on the menu, the reprint data will be deleted and the printer will go online.
button Operations
Go Exit from the control panel menu and reprint settings.
Clear error messages.
Pause and continue printing.
Job Cancel Stop and cancel the printing job in progress.
Reprint Choose the reprint menu and the number of extra copies (1-999).
+ Move forward through menus.
Move forward through the available options.
- Move backward through menus.
Move backward through the available options.
Back Go back one level in the menu structure.
Set Choose the control panel menu.
Set the chosen menus and settings.