Brother DCP-9040CN Printer User Manual


 
36
CAUTION
Lightning and power surges can damage this product! We recommend that you use a quality
surge protection device on the AC power line or unplug the cords during a lightning storm.
To prevent injuries, be careful not to put your
fingers in the area shown in the illustrations.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the
toner dust with a dry, lint-free cloth and dispose of it according to local regulations.
When you move the machine, grasp the side hand
holds that are located at the bottom of the
machine. DO NOT carry the machine by holding
scanner unit.
To prevent injuries when moving or lifting this
machine, make sure to use at least two people.
This product must be installed near an AC power outlet that is easily accessible. In case of
an emergency, you must disconnect the power cord from the AC power outlet to shut off the
power completely.
DO NOT use flammable substances or any type of
spray to clean the inside or outside of the machine.
Doing this may cause a fire or electrical shock.
Refer to Routine maintenance on page 77 for how
to clean the machine.