Brother MFC-3220C All in One Printer User Manual


 
USING THE PHOTOCAPTURE CENTER
FROM YOUR PC
7 - 3
For Network cable users
1
Insert a SmartMedia
®
, CompactFlash
®
, Memory Stick
®
or
SecureDigital card into your machine.
2
Double-click the Network PhotoCapture Center icon.
3
Your browser software will appear and a list of file names on
your media card will be shown.
4
Click the file name you wish to see.
When you take out a media card, do the following to prevent damage
to the media card:
5
Close the browser.
6
Wait until the PhotoCapture button stops blinking before taking
out the media card.
If more than two media cards are inserted at the same time, the
PhotoCapture Center
will read only the card that was put in
first. To have access to another card, you must first take out all
the cards, and then put in the media card you wish to access.
Your browser software accesses the media card using FTP and
the network Host Name of the machine.
Do NOT unplug the power cord, or remove a SmartMedia
®
,
CompactFlash
®
, Memory Stick
®
or SecureDigital card from the
machine while it is reading the card (PhotoCapture button
flashing). You could loose your data or damage the card.
If you took out the media card while PhotoCapture button was
flashing, you must immediately restart your PC before putting
the media card back in. If you put in another media card before
the PC is rebooted, the data on it may be destroyed.