Filter
Top Products
130
Jam Inside The paper is jammed inside the
machine.
(See Paper jams on page 135.)
Jam MP Tray The paper is jammed in the MP
tray of the machine.
(See Paper jams on page 135.)
Jam Rear The paper is jammed in the back
of the machine.
(See Paper jams on page 135.)
Jam Tray 1
Jam Tray 2
(MFC-8380DN)
The paper is jammed in the paper
tray of the machine.
(See Paper jams on page 135.)
No Paper The machine is out of paper or
paper is not correctly loaded in
the paper tray.
Do one of the following:
Refill the paper in the paper tray or MP
tray.
Remove the paper and load it again.
No Response/Busy The number you dialled does not
answer or is busy.
Verify the number and try again.
No Toner The toner cartridge or the drum
unit and toner cartridge assembly
is not installed properly.
Re-install the toner cartridge or the drum unit
and toner cartridge assembly.
No Tray The paper tray is not completely
closed.
Close the paper tray properly.
Out of Memory The machine’s memory is full. Fax sending or copy operation in
progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See
Out of memory message on page 46 or
page 86.)
Print operation in process
Do one of the following:
Reduce print resolution. (See Advanced
tab in the Software User’s Guide on the
CD-ROM.)
Clear the faxes from the memory. (See
Out of memory message on page 86.)
Output Tray Full The ADF output tray has reached
its maximum capacity.
Remove the scanned pages from the ADF
output tray. If you want to scan the remaining
pages of your documents, dial the fax
number (if you are sending a fax) and press
Start.
Error Message Cause Action