Filter
Top Products
3 - 6 FRONT PANEL SETUP
NC9100h_FM6.0
(For DCP-310CN)
1
Press Menu.
2
Press ▲ or ▼ to select 3.LAN.
Press Set.
3
Press ▲ or ▼ to select 1.Setup TCP/IP.
Press Set.
4
Press ▲ or ▼ to select 2.IP Address.
Press Set.
5
Press ▲ or ▼ to select 1 to change.
Press Set.
6
Press ▲ repeatedly to enter the first three-digit number for the
IP address.
Press Set.
Repeat this step until you have entered the fourth three-digit
number to complete the IP address.
7
Press Stop/Exit.
Each number can also be increased / decreased by holding
down
▲ or ▼.
When the Boot Method is set to “Auto”, the machine cannot
receive an IP address from a BOOTP server in Windows
®
2000. So please ensure that you use DHCP for Windows
®
2000 server.