Filter
Top Products
Page 3
Connecting to a DC Supply (Optional)
The PocketJet can be powered from its internal NiMH battery or from a vehicle DC
supply. To install the battery, See page 36. To connect your PocketJet to a “12-volt”
vehicle DC supply to print or maintain the battery charge, follow the steps below.
1. Connect an appropriate power cord (either with a cigarette plug or direct wired)
to the vehicle 12VDC supply as shown in Figure 3. (These items are available as
options. See Chapter 8.)
2. Connect the power cord to the PocketJet.
3. Turn on the vehicle power, and then turn on the PocketJet.
Figure 3. Connecting the printer to DC power