Filter
Top Products
Page 35
Clean:
Clicking on this button places the printer in “Cleaning Mode”. Refer to that
maintenance procedure in this manual for further instructions.
Factory Reset:
Clicking on this button will return the printer to its original factory settings for
fonts and conguration. The conguration data from the le “PJ3Factory.cfg” or
“PJ3PlusFactory.cfg” on the same directory as exe le will be loaded and displayed.
Since that le is expected to match the internal factory conguration of your printer,
this le’s properties are set to “Read Only” and it should not be modied.
Save Cong:
Clicking on this button will save the conguration as you see it to the le “PJ3Default.
cfg” or “PJ3PlusDefault.cfg” on the same directory as exe le and then send this
conguration information to the printer. Be sure that all of the settings are adjusted
to your liking. Once sent to the printer, these settings will become the power-on
default settings but they can be changed subsequently as necessary..
Close:
This selection closes this application without sending data to the printer and without
saving the current settings.