Brother PJ-522 Printer User Manual


  Open as PDF
of 82
 
Page 17
PocketJet Conguration Utility
The CD supplied with the printers (PJ-522, PJ-523) contains a PocketJet Conguration
Utility. This can be used to access advanced printer settings for custom installations if
needed.
The Conguration Utility can be used in these three situations:
§ If you are printing from a Windows 2000, XP, or Vista-based system and
are using the Windows driver supplied by Brother, only the following ve
options should be congured from the conguration utility:
§Auto- On
§Auto- Off
§Pre-feed
For Bluetooth Printers:
§PIN Code Setting
§Local Name Setting
Note that all other settings in the Conguration Utility window will be overwritten
by the installed driver settings.
§ If you are printing from a Windows system but are not using the Windows
driver supplied by Brother, all options can be congured.
§ If you are printing from a non-Windows-based system, all options can be
congured.
Installing the PocketJet 3 Utility:
When using the CD Installation program to install drivers for Windows Vista, XP,
2000 Professional, you should select “Install Conguration Utility” Button. You
must follow the onscreen instructions to complete the installation (See “Driver
Installation”, page 7).
To install the PocketJet 3 Utility independently on a Windows host, browse the CD into
the <CD-Drive>:\<PJ3, PJ3BT, PJ3PLUS or PJ3PLUSBT> \Cong folder, and then
double-click the PJ3CONFIGSETUP.EXE (or PJ3PLUSCONFIGSETUP.EXE), and
follow the onscreen instructions.
 previous next