Page 7
Driver Installation
NOTE: Please do NOT connect your PocketJet printer to your computer via the USB
cable UNTIL you have performed the driver installation. If you accidentally
do so, cancel the “New Hardware Wizard”, disconnect the printer, and begin
the driver installation described below.
Using a Bluetooth Interface - Be sure Bluetooth is installed on the host computer and
is active according to the host computer instructions before installing the PocketJet
driver and the PocketJet Conguration Utility if you are going to use the Bluetooth
interface.
CD Install
1. Insert the CD in your PC’s CD drive.
2. Select the model.
3. Select the install item you wish to install.
4. Follow all on-screen instructions to install the software. Your Windows operating
system will be selected automatically.
5. Click “Finish” to close the CD or click “browse” to learn about additional
solutions available for your PocketJet printer.
NOTE: If the automatic CD installation does not proceed as explained above, use the
manual install procedure below.