Filter
Top Products
1
2
3
4
5
6
7
8
9
45
z EDITING A LABEL
Creating a Bar Code Label
Select a character using
the or
key, then press
the
OK
or
Enter
key to insert the character in the bar code data.
Press the
OK
or
Enter
key
to insert the bar code in the label.
The bar code is displayed on the text entry screen.
zBar Code Settingsz
z
Special Character Listz
CODE39 CODABAR
6
7
• The "C.Digit" (Check Digit) attribute is only available for the CODE39, I-2/5 and CODABAR protocols
• Press the
Escape
key to return to the previous step.
• Press the
Space
key to set the selected attribute to the default value.
• Refer to the Bar Code Settings table for a list of all available settings.
Attribute Value
Protocol
CODE39
, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
CODABAR
Width
Small
Large
Under#
(characters printed below
bar code)
On
Off
C.Digit
(check digit)
Off
On
(only available for the CODE39, I-2/5
and CODABAR protocols)
Code Special Character Code Special Character
0 0
1 1
2 (SPACE) 2
3 3
4 4
5 5
6