Filter
Top Products
WLA-L11 User’s Manual 13
Refer to "Installing AirStation Manager" (page 14).
Adding the TCP/IP Protocol (Windows NT 4.0)
If the TCP/IP Protocol is not in the settings personal computer, add the protocol using the following proce-
dure.
6
Set the IP address. When you have entered the
IP address, click the OK button.
Consult your network manager
for the IP address setting of the settings
personal computer.
If there is a DHCP server on the
network, select Obtain an IP address from
a DHCP server.
For IP address settings, refer
to "Allocating IP Addresses" (page 52) in
Chapter 3, Troubleshooting.
7
Restart Windows NT 4.0.
The TCP/IP protocol is set the settings personal computer.
1
Click the Start button, and then select Settings, and Control Panel.
2
Double-click the Network icon.
3
Click the Protocols tab, and then click the
Add button.
4
Select TCP/IP Protocol, and click the
OK
button.
Continue to next page