Filter
Top Products
WLA-L11 User’s Manual 19
Windows 2000/NT 4.0
The AirStation is set in the settings personal computer using the following procedure.
1
Click the Start button, and select Programs, MELCO AirStation, and then
AirStation Manager.
2
Select Edit, and Search AirStation.
3
Windows will search for the AirStation.
4
Select the AirStation once it has been found
and then select Admin, and Set IP Address.
5
The IP address settings is set and click the OK
button.
• Change the IP address and net mask
depending on the environment.
• Consult your network manager for the IP
address settings.
• When making the initial IP address set-
tings, leave the Password field blank.
For IP address settings, refer
to "Allocating IP Addresses" (page 52) in
Chapter 3 Troubleshooting.
6
The AirStation IP address will be changed.