Filter
Top Products
WLA-L11 User’s Manual 7
Adding TCP/IP Protocols (Windows 98/95)
If the TCP/IP Protocol is not in added to the settings personal computer, add the protocol using the following
procedure.
This completes the TCP/IP protocol installation.
Continue to the “TCP/IP Protocol Settings” (Windows 98/95) section procedure Step 5.
1
Click the Start button, and select Settings, Control Panel, and then Network.
2
Click the Add button.
3
Select Protocol, and click the Add button.
4
In the Manufacturers field, select Microsoft,
and in the Network Protocols field, select
TCP/IP and click the OK button.
5
The TCP/IP protocol is added.