Filter
Top Products
EXAMPLE NETWORKS
72 CyberSWITCH
We now need to enter the metric value for this route. The metric value is the administrative distance
to the destination of the entry. The administrative distance is typically measured by the number of
hop counts (number of routers) between the system and the destination, but it is up to you to assign
a proper value to each route entry. If multiple routes exist to the same destination, the route with
the least metric value will be chosen as its primary route. Care must be taken when assigning the
metric value of “0”, because it is interpreted that the destination is reachable directly and therefore
no intermediate router will be used. Press <return> to accept the default metric value of 2.
Host #1
File Server
Internet
Router
LAN 1
128.1.1.8
128.1.1.3 128.1.1.7
LAN Interface 128.1.1.1
CSX1200
CSX1200
Host #2
LAN 2
128.3.3.4
LAN Interface 128.3.3.1
ISDN
SITE1 needs static route
to SITE2
SITE1 needs default route
to SITE2
IP UnNumbered Interface for
SITE1 and SITE2
POWER
SERVICE
TX
RX
10BASE - T
LAN B-CHANNELS E1 ONLY
B2 B4
B6 B8
B26 B28
B22 B24
B18 B20
B14 B16
B10 B12
B30 L1
B1 B3
B5 B7
B25 B27
B21 B23
B17 B19
B13 B15
B9 B11
B29 B31
E1
D
T1
D
POWER
SERVICE
TX
RX
10BASE - T
LAN B-CHANNELS E1 ONLY
B2 B4
B6 B8
B26 B28
B22 B24
B18 B20
B14 B16
B10 B12
B30 L1
B1 B3
B5 B7
B25 B27
B21 B23
B17 B19
B13 B15
B9 B11
B29 B31
E1
D
T1
D
"SITE1"
"SITE2"