Cabletron Systems 2E48-27R Switch User Manual


 
Chapter 5: Local Management
5-12 2E48-27R/2E49-27R User’s Guide
Using the RETURN Command
To exit LM using the RETURN command, proceed as follows:
1. Use the arrow keys to highlight the RETURN command at the bottom
of the Local Management screen.
2. Press ENTER. The previous screen in the Local Management
hierarchy displays.
3. Exit from Local Management by repeating steps 1 and 2 until the
Device Menu screen displays.
4. To end the LM session, use the arrow keys to highlight the RETURN
command at the bottom of the Device Menu screen.
5. Press ENTER. The Local Management Password screen displays and
the session ends.
NOTE
The user can also exit Local Management screens by pressing
ESC twice. This exit method does not warn about unsaved
changes and all unsaved changes are lost.