Cabletron Systems 2E48-27R Switch User Manual


 
SNMP Community Names Screen
2E48-27R/2E49-27R User’s Guide 5-33
5.8 SNMP COMMUNITY NAMES SCREEN
The SNMP Community Names screen allows the user to set SNMP
Management community names. Community names act as passwords to
Local/Remote Management and are agents of security access to the
2E4X-27R. Access to the 2E4X-27R is controlled by enacting any of
three different levels of security authorization (read-only, read-write, and
super-user).
To access the SNMP Community Names screen from the Device
Configuration Menu screen, use the arrow keys to highlight the SNMP
COMMUNITY NAMES menu item and press ENTER. The SNMP
Community Names screen displays.
Figure 5-16 SNMP Community Names Screen
NOTE
Super-user access gives the user full management privileges,
allows existing passwords to be changed, and all modifiable
MIB objects for the Cabletron Container MIB and Internet
MIB-II to be edited.
Firmware Revision: XX.XX.XX
SNMP Community Names
23141-16
Device Type: 2E48-27R
BOOTPROM Revision: XX.XX.XX
Access Policy
read-only
read-write
super-user
2E48-27R LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
Community Name
public
public
public
EXIT