Filter
Top Products
Using LANVIEW
Troubleshooting 4-3
NOTE
NOTE
NOTE
NOTE
The terms flashing, blinking, and solid used in the LED definition tables of this
chapter indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse, (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Table 4-1 LANVIEW LEDs CPU, Receive, and Transmit Status
LED Color State Recommended Action
CPU Off Power off. Power up chassis.
Red Blinking. Hardware failure
has occurred.
Contact Cabletron Systems.
Solid. Resetting, normal
power up reset.
If the LED remains red for several
minutes, contact Cabletron Systems.
Amber Blinking. Crippled. Contact Cabletron Systems.
Solid. Testing. If the LED remains amber for several
minutes, contact Cabletron Systems.
Green Solid. Functional. None.
Amber
and
Green
Booting. Blinks amber and
green while booting.
None.
RX Off No link. No activity. Port
enabled or disabled.
None.
Green Solid. Port enabled, link, no
activity.
None.
Blinking. Port disabled, link. None.
Amber Flashing. Port enabled, link,
activity.
None.
Red Diagnostic failure. Contact Cabletron Systems.