Filter
Top Products
SIMM Upgrade
Optional Installations and Mode Switch Bank Settings B-3
• Switch 8 – Reset Password/Community Strings. Changing the position of this switch clears
only the user-entered passwords stored in NVRAM, and restores the default passwords. Once
the SmartSwitch resets, the passwords can either be reentered or the default passwords (Public
and ENTER) may be used.
B.3 SIMM UPGRADE
Memory upgrade is available for the 6E233-49 SmartSwitch module to expand the DRAM to 32
MB. This section explains how to locate and add/replace a Single In-line Memory Module
(SIMM). For information on the available SIMM upgrades, contact Cabletron Systems. For details
on getting help, refer to Section 1.2.
B.3.1 Locating SIMMs
Figure B-2 shows the location of the DRAM SIMM connector.
Figure B-2 SIMM Slot Locations
NOTE
NOTE
NOTE
NOTE
Do not change the position of switch 8 unless it is necessary to reset the module
super-user configured passwords to their factory default settings.
DRAM SIMM