Filter
Top Products
Enabling Security and Traps 7-17
Security
Port-level Security and Traps
To enable or disable security and/or traps at the port level:
1. In the Repeater Security window, click to selected the desired repeater
interface, or channel, in the scroll list.
2. Click ; the Channel X Port Security window, Figure 7-7, will
appear.
Figure 7-7. Channel X Port Security Window
3. Use the Set Security For field or the mouse to select the port or ports for
which you wish to configure security (note that the settings in the Set
Security For field will change automatically as you click to select or de-select
ports).
NOTE
For information on configuring security level, violation response, and secure addresses,
see Configuring Security, page 7-6. For information on resetting learned addresses, see
Resetting Learned Addresses, page 7-11.