Cabletron Systems SEHI-32 Switch User Manual


 
LOCAL MANAGEMENT
Page 6-4
6.1.2 Management Terminal Setup Parameters
Table 6-1 lists the setup parameters for the local management
terminal. If your terminal is a Digital Equipment Corporation
VT320™ terminal, press F3 to access the Setup Directory. If you have
a terminal emulation of the VT320™, refer to your equipment user
manual for setup procedures.
Table 6-1. Terminal Setup Parameters
Menu Function Selection
Display Setup: Columns 80 Columns
Controls Interpret Controls
Auto Wrap No Auto Wrap
Test Cursor Cursor
General Setup: Mode 7 Bit Control
Cursor Keys Normal Cursor Keys
Communications
Setup:
Transmit Transmit = 9600
Receive Receive = Transmit
XOFF any option
Bits, Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
Local Echo No Local Echo
Port DEC-423,
Data Leads Only
Transmit any option
Auto Answerback No Auto Answerback
Keyboard Setup: Auto Repeat any option
Keyclick any option
Margin Bell Margin Bell
Warning Bell Warning Bell
Auto Answerback No Auto Answerback