Filter
Top Products
LOCAL MANAGEMENT
Page 6-24
Port Seg. Status
Displays the segmentation status of the port selected. The two
possible status messages are Segmented or Unsegmented. The SEHI
and SEH automatically partition problem segments, and reconnect
non-problem segments to the network.
Enable Port
This command lets you enable the selected port.
Disable Port
This command lets you Disable the selected port.
Update-Freq
This command lets you select the time interval between Stack/Module/
Port counter updates. You can choose update intervals in increments
of 3 seconds, with the Maximum interval being 99 seconds.
Module
This command lets you view statistics for a selected module in the
stack. The SEHI is Module 1 and each SEH in the stack follows in
sequential order. Figure 6-9 shows each module number in the stack.
Figure 6-9. Module Number Sequence
Port
This command lets you view port statistics for ports 1-26 of the
selected module.
SEH - MODULE 5
SEH - MODULE 4
SEH - MODULE 3
SEH - MODULE 2
SEHI - MODULE 1