Cabletron Systems SEHI-32 Switch User Manual


 
LOCAL MANAGEMENT
Page 6-5
6.2 ACCESSING LOCAL MANAGEMENT
After you configure the local management terminal and properly
attach the cables to the SEHI, you can access the Local Management
interface.
To access Local Management:
1. Power up the terminal. The SEHI Password screen shown in
Figure 6-2 appears.
Figure 6-2. Password Screen
2. Enter your Password. The factory default password for
Super-User access is “public” or the Return key.
Note: Your password is one of the community names specified in the
Community Name Table. Access to certain Local Management
capabilities depends on the degree of access accorded that community
name. See Section 6.3.1 for more details about community names.
Cabletron Systems Incorporated
35 Industrial Way, P.O. Box 5005
Rochester, NH 03867-0505 U.S.A.
(603) 332-9400
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
(c) Copyright Cabletron Systems, Inc. 1993
EnterUser Password:
SEHI F/W Version: X.XX.XX
Boot Prom Version: X.XX.XX
SEHI Board Version: X.X