Cabletron Systems SEHI-32 Switch User Manual


 
LOCAL MANAGEMENT
Page 6-13
Setting the Default Gateway
The Default Gateway field allows you to describe the router through
which the SEHI will be forwarding IP packets.
To set the Default Gateway:
1. Use the arrow keys to highlight the Default Gateway field.
2. Enter the gateway’s default mask in this field. The format for this
entry is XXX.XXX.XXX.XXX with values for XXX being from 0 to
255.
3. Press the Return key. If your entry is accepted as a valid default
gateway, “OK” appears to the right of the field.
4. Use the arrow keys to highlight the SAVE option, then press the
Return key or F6. The “SAVED OK” message appears indicating
that the changes have been saved to memory.
Using the Port ENABLE Override
To set the Port ENABLE Override:
1. Use the arrow keys to highlight the Port ENABLE Override
field.
2. Press the Return key to toggle from the default setting of
“OVERRIDE DISABLED” to “OVERRIDE ENABLED”.
3. The adjacent field displays “Y/N”. Enter Y to continue enabling all
of the ports, or N to discontinue the port enable override. If you
answer Y, all existing ports are enabled, and the message “PORT
ENABLED” appears.