Cabletron Systems SEHI-32 Switch User Manual


 
LOCAL MANAGEMENT
Page 6-14
Exiting the Configuration Screen
1. To exit the Configuration screen, press the appropriate Function
key. To return to the Feature Selection screen, use the arrow keys
to highlight the RETURN command.
2. Press the Return key. The Feature Selection screen appears.
6.3.3 The Trap Table Screen
To access the Trap Table screen from the Features Selection screen,
use the arrow keys to highlight the Component Trap Table option,
then press the Return key or F8. The Trap Table screen shown in
Figure 6-6 appears.
Figure 6-6. Trap Table Screen
The Trap Table defines the management stations that will receive
SNMP Traps for alarm/event notification. The following sections
explain each field on the Trap Table screen and instructions on how to
change them.
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
TRAP TABLE
SAVE COMMUNITY NAMES IP TABLE SNMP TOOLS RETURN
F6 F7 F8 F9
Traps
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
N
N
N
N
N
N
N
N
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SNMP Community Name
IP Address