Filter
Top Products
Chapter 2
2-15
status.
Printing resumes when the printhead radiates naturally to cool down to below a predetermined temperature or
when 30 seconds or longer have elapsed since the detection of the temperature higher than the protection
temperature.
Protection level 2
When the head temperature sensor (DI sensor) has detected an abnormal temperature, the printer shuts down the
print operation immediately, moving the carriage to the home position for capping, with an error indication on
the display.
2.2.7 Pause between Pages
0012-6252
An inter-page function is available to prevent ink rubbing, which keeps paper just printed hanging above the
platen and waiting for a predetermined period of time before delivery.
The wait time is user-programmable from the print driver. This feature is particularly useful on paper that takes
time to dry after printing.
A 30-second drying time is set automatically for borderless printing.
2.2.8 White Raster Skip
0012-6253
This printer supports a white raster skip function to bypass carriage scanning in a consecutive sequence of voids
in print data for added throughput.
2.2.9 Sleep Mode
0012-6255
The printer has sleep mode to save on its standby power requirement.
The printer transitions to sleep mode automatically when it has been left idle or no print data has been received
for a predetermined period of time while the printer is online or offline.
The printer exits sleep mode when any operation panel key is activated or print data is received from the host
computer.
The time to transition to sleep mode is variable from the operation panel.
(Default: 5 minutes)