Filter
Top Products
Back Previous Page Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
25
NOTE
• When scanning folded documents, switch the feed selection lever
to (Bypass).
• When placing folded documents, place the document into the scanner so that
the fold is on the right side. The side of the folded document facing you will
become the right side of the combined image.
• When scanning folded documents, click the [Basic] tab of the ISIS/TWAIN
driver → click [Folio] in the [Scanning Side] box → click [OK].
(See Chapter 4, "ISIS/TWAIN Driver Settings.")
• The maximum size for the combined image is 11" X 17"/A3. When using the
Folio function for an irregular document size, click the [Basic] tab of the
ISIS/TWAIN driver → click [Auto-detection] in the [Page Size] box → click
[OK].
When scanning with the DR-2010C/DR-2510C, in addition to scanning from an
application, you can also use the Job function to perform scanning by pressing a
scan button. This section describes the procedures for scanning using the
CapturePerfect 3.0 software included with the scanner, scanning using the Job
function, and other special scanning. For information on installing the various
applications and drivers, see the Easy Start Guide, or Chapter 2, "Setup." For
details on scan settings, see Chapter 4, "ISIS/TWAIN Driver Settings."
This section describes how to start CapturePerfect 3.0, select the scanner, and scan
documents.
The Scan Batch to File function is used here as an example.
For details, see the CapturePerfect 3.0 Operation Guide and CapturePerfect Online
Help.
1
From the Windows task bar, click [Start] → point to [All Programs] →
[CapturePerfect 3.0] → click [CapturePerfect 3.0].
Scanning With CapturePerfect 3.0
4. Scanning Methods
4 Scanning Methods
4
.
Scanning
Methods