Filter
Top Products
Back Previous Page Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
68
3
Grasp the ends of the roller cover inside the front unit and pull it down to
open it.
4
Lift up the roller fixing lever (c), and slide it to the right (d).
5
Remove the retard roller by moving it to the right to detach it from its shaft,
and pull it out.
Attaching the Retard Roller
1
Insert the retard roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the front unit.
2
Slide the roller fixing lever to the left to lock the roller into the hole on the
left of the retard roller.
3
Push down the lever to lock the shaft of the feeding roller into place.