Filter
Top Products
Back Previous Page Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
48
This section describes the procedure for adjusting the contours of the scanned
image.
1
In the ISIS/TWAIN driver properties dialog box, click the [Image
processing] tab → adjust the [Edge emphasis] slider to adjust the contours
of the scanned image.
Move the slider toward [Soft] to soften the image contours, or toward [Sharp] to
sharpen the image contours.
This section describes the procedure for rotating the orientation of the scanned
image.
1
In the ISIS/TWAIN driver properties dialog box, click the [Image
processing] tab → select the angle to rotate the image from the [Document
Orientation] drop-down list.
NOTE
The scanned image will be rotated as follows, according to the orientation of the
placed document and the specified angle.
Image Contour Adjustment Image Rotation
270 degrees
Document: face down
Document Orientation
(clockwise)
Scanned Image
0 degrees 90 degrees 180 degrees