1
1
16
To Use the Printer by Connecting to a Computer
TURN OFF THE PRINTER (A).
It takes about 1 minute until the
printer turns off.
•
USB Connection
Connect the printer to the
computer with a USB cable.
Make sure the printer is turned on.
The USB Port is located on the right
side at the back of the printer. The
lower port is for USB.
•
If the Found New Hardware or
Found New Hardware Wizard
dialog box appears:
□
The dialog box may close. In this
case, proceed from step
.
Click Cancel to quit the
dialog box.
Proceed from step
.
3
2
Remove the USB cable
connected to your computer.
1
If you connect a USB cable to the
printer before installation of the
drivers, this screen appears.
For Windows Vista/XP□
If you are using Internet
Explorer 7 or later, you
can use the Web print
software Easy-WebPrint EX.
An internet connection is
required for installation. (It is
also possible to install this
software later.)
