Filter
Top Products
Windows Macintosh
15
29
To Use the Printer by Connecting to a Computer
When the Setup Completion dialog box appears, remove the USB cable, then click
Finish.
To change the port name, click Set Port Name. For details, refer to "Changing the Port Name" in the
printed manual: Network Setup Troubleshooting.
•
If Unsafe Removal of Device is displayed, click OK.•
When the Set Printer IP Address dialog box appears,
click Connect.
If the printer is detected automatically, the Set Printer IP
Address dialog box does not appear.
If no connection is established even after Connect is clicked,
refer to "The Set Printer IP Address Screen is Displayed" in the
printed manual: Network Setup Troubleshooting.
•
If the following dialog box appears□