Filter
Top Products
Windows Macintosh
10 11 12
45
To Use the Printer by Connecting to a Computer
When the Printers dialog box appears, select the
printer, then click Next.
If the printer is not detected, make sure of the following, click
Update.
•
Some programs that switch the network environment
depending on your system environment will enable a rewall
by default. Check the settings of any such software.
•
The printer is turned on.−
The printer is connected to the network device with the
LAN cable.
−
When the Setup Completion dialog box appears,
click Finish.
To change the port name, click Set Port Name. For
details, refer to "Changing the Port Name" in the printed
manual: Network Setup Troubleshooting.
•
When the Print Head Alignment screen
appears, click Next.
Go to the next step without performing Print Head
Alignment.
Follow any on-screen instructions to proceed with the
installation.