Canon 3814B010 Webcam User Manual


 
220
3 Custom Function SettingsN
< > ONE SHOT z AI SERVO
In One-Shot AF mode, when you hold down the button to which this function
has been assigned, the camera switches to AI Servo AF mode. And in the
AI Servo AF mode, the camera switches to One-Shot AF mode only while
you hold down the button. Convenient when you need to keep switching
between One-Shot AF and AI Servo AF for a subject which keeps moving
and stopping.
< > AF point direct selection
Without pressing the <S> button, you can select the AF point directly
with <5> or <9>. With the <5> dial, you can only select a left or right
AF point.
*3: If you press the <B> button in step 3 on page 217, you can set that
pressing <9> straight down selects either [Switch to center AF
point] or [Switch to registered AF point].
< > Metering start
When you press the shutter button halfway, you can execute only
exposure metering.
< > AE lock
Pressing the button assigned with this function will apply AE lock. Convenient
when you want to focus and meter at different parts of the picture.
< > FE lock
During flash photography, pressing the button assigned with this function
will fire a preflash and record the required flash output (FE lock).
< > Shutter speed setting in M mode
In the <4> (Manual exposure) mode, you can set the shutter speed with
the <6> or <5> dial.
< > Aperture setting in M mode
In the <4> (Manual exposure) mode, you can set the aperture with the
<6> or <5> dial.
< > Image quality
Press <0> to display the image-recording quality setting screen (p.58)
on the LCD monitor.
< > One-touch RAW+JPEG
When you press the <B> button and shoot, the RAW or JPEG image
set with [One-touch RAW+JPEG] (p.61) will also be recorded.
COPY