Filter
Top Products
244
Troubleshooting Guide
If the power is cut off while an image is being recorded to the card, the
access lamp will still continue to light/blink for a few seconds. When
the image recording is completed, the power will turn off automatically.
Use a fully-charged battery (p.24).
The battery performance might have degraded. See the [7 Battery
info.] menu to check the battery’s performance level (p.230). If the
battery performance is poor, replace the battery pack with a new one.
If you keep displaying the Quick Control screen (p.38) or shooting Live
View shooting or movie shooting (p.131, 149) for a prolonged period,
the number of possible shots will decrease.
Auto power off is in effect. If you do not want auto power off to take
effect, set [5 Auto power off] to [Off].
The card is not properly inserted (p.29).
If the card is full, replace the card or delete unnecessary images to
make room (p.29, 179).
If you try to focus in One-Shot AF mode while the focus confirmation
light <o> in the viewfinder blinks, a picture cannot be taken. Press the
shutter button halfway again to focus, or focus manually (p.35, 92).
Install a recharged battery pack in the camera (p.26).
The access lamp still blinks even when the power switch is set to <
2
>.
The battery becomes exhausted quickly.
The camera turns off by itself.
Shooting-Related Problems
No images can be shot or recorded.
The viewfinder is dark.
COPY