Filter
Top Products
1-12
Setting the TEL LINE TYPE
See pp. 2-2, 2-3 for the buttons on the operation panel.
Dialling through a switchboard (PBX)
A PBX (private branch exchange) is an on-site telephone switchboard.
• If your fax is connected through a switchboard, dial an outside line access number first. Then dial the rest
of the number.
• If you want to dial with automatic dialling, you may have to insert a pause between the outside line number
and the telephone number when you register the number for one-touch or coded speed dialling.
• When the fax is connected to a PBX or other telephone switching system, you can register the access type
and outside access line number under the [R] button (see p. 1-13). Once you have registered them, you
simply need to press [R] before dialling a fax or telephone number.
1
Press [Function].
D
Press [Start/Copy] twice.
2
Use [
3
] or [
4
] to select TEL LINE TYPE.
D
Press [Start/Copy].
3
Use [
3
] or [
4
] to select TOUCH TONE.
D
Press [Start/Copy].
4
Press [Stop].
Setting ends and the fax returns to standby mode.