Filter
Top Products
7
USING THE BUILT-IN ANSWERING MACHINE
(TAM MODE) (FAX-B140 only)
7
7-1
USING THE BUILT-IN ANSWERING
MACHINE (TAM MODE)
(FAX-B140 only)
Recording the outgoing message
Before you use TAM MODE, you must record an outgoing message. Use the microphone on the operation
panel to record your outgoing message. Only one outgoing message, no longer than 20 seconds, can be
recorded.
Types of messages that can be recorded________
Recording the outgoing message ______________
To record another type of message, select the type of message you want to record in step 1, and then follow
the procedure below to record it.
OUTGOING MESSAGE:
Answering machine message
ALT OUTGOING MSG:
Answering message only, used when the recording time is set to 0 or the
memory is full. Caller cannot leave a message.
VOICE MEMO:
See p. 7-6.
FAXTEL MESSAGE:
Message played when the Fax/Tel mode is set.
FORWARDING MSG:
Message played when any new telephone messages are forwarded to a
forwarding number.
1
Use [
3
] or [
4
] to select OUTGOING MESSAGE.
2
Press [Record] and speak into the microphone to
record your outgoing message.
The remaining recording time is displayed on the LCD.
-or-
Press [Start/Copy], use [
3
] or [
4
] to select
RECORD and press [Start/Copy] again. Then speak
into the microphone to record your outgoing
message.
3
Press [Stop] twice when recording is finished.
You can record an alternative outgoing message, fax/
telephone switching message or forwarding message by
selecting the appropriate option in step 1 above and then
continuing on to steps 2 and 3.
Note
You cannot delete the OUTGOING MESSAGE. To record a new outgoing message, repeat steps 1
to 3 above. The old outgoing message will be automatically deleted when you record your new
message.