Filter
Top Products
2-13
2
PREPARING TO USE YOUR FAX
Registering UCanTalk voice tags
(Fax-B140 only)
UCanTalk allows you to dial a number by speaking the receiving party’s name to the fax. Before you can
use the UCanTalk feature, you must register voice tags.
You can register a name or phrase (no longer than 3 seconds) you want to use to retrieve the party, such as the first
name, family name, nickname, company name, official position, and so forth. You can register up to 15 voice tags.
Registering voice tags with one-touch/coded speed
dialling numbers and names __________________
Follow the procedures on Registering one-touch/coded speed dialling numbers and names, pp. 2-10 to 2-12.
Adding voice tags to the one-touch/coded speed
dialling numbers ___________________________
Note
You can check whether a voice tag has been registered for a specific one-touch or coded speed dialling
entry by printing the speed dialling lists. Entries with a voice tag are preceded by an icon.
1
Press [Function].
2
Use [
3
] or [
4
] to select TEL REGISTRATION.
D
Press [Start/Copy].
3
Use [
3
] or [
4
] to select 1-TOUCH SPD DIAL or
CODED SPEED DIAL.
D
Press [Start/Copy].
4
Use [
3
] or [
4
] to select the receiving party you
want to add a voice tag to.
D
Press [Start/Copy] twice.
5
When the fax asks you if you want to add a voice
tag, press [
:
] to select YES.
If a voice tag is already registered under this speed dialling
number, the fax asks you if you want to modify the voice tag
(see Modifying voice tags, p. 2-14).