Filter
Top Products
8-4
RX SETTINGS
* Only available in some countries.
PRINTER SETTINGS
Name Description Settings
ECM RX
Enable/disable error correction during reception. ON/OFF
FAX/TEL AUTO SW
Enable/disable FAX/TEL switchover. When ON, this feature answers calls,
and if no fax tone is detected, the fax rings to alert you of an incoming call.
RING START TIME
Set the duration that the fax listens for a fax tone before starting to ring. 8 seconds (0 to 30)
F/T RING TIME
Set the length of time the fax will ring to alert you of an incoming call. 22 seconds (10 to 60)
DEFAULT ACTION
Select the action taken after the F/T RING TIME expires. DISCONNECT/RECEIVE
INCOMING RING
When the handset or an extension phone is connected, set the fax to ring
when it receives a call.
ON/OFF
RING COUNT
Set the number of incoming rings before the fax answers. 2 times (1 to 99)
MAN/AUTO SWITCH
Determine if the fax switches to document receive mode after the fax rings
for a specified time when the fax is in the manual receive mode.
ON/OFF
RING TIME
Set the amount of time the fax will ring before switching to document
receive mode.
15 seconds (1 to 99)
REMOTE RX
Enables/disables remote receiving. ON/OFF
REMOTE RX ID
If you set REMOTE RX to ON, you can select the remote receiving ID. 25 (00 to 99)
MEMORY RX
Turn on/off memory receiving of a document. ON/OFF
CALLER ID*
Determine if the fax displays the caller’s name and fax number when
receiving a call.
ON/OFF
Name Description Settings
RX REDUCTION
Enable/disable reduction for received documents. ON/OFF
FIXED REDUCTION
Select the reduction rate. STANDARD/
A4
1
LTR /
LGL
1
LT R
REDUCE DIMENSION
Select reduction in height only or both width and height. VERTICAL ONLY/
HORIZ & VERTICAL
PAPER SIZE
Select the size of the loaded fax paper. A4/LTR/LGL