Filter
Top Products
92Scanner Problems
Scanning Result Is Unsatisfactory
■ Scanned Image Blurred or Distorted
CHECK 1 ARE YOU USING A CLEAR IMAGE FOR SCANNING?
Blurry images are not suited for scanning. For best scanning results,
always use a clear, sharp image. (The scanned image cannot be better
than the original image.)
C
HECK 2 IS THE SCANNING HOLDER UNSTAINED AND UNDAMAGED?
The scanning holder is bound to get dirty. Clean the scanning holder using
a soft cloth that is dipped in a weak, neutral detergent solution, and then
wipe its wet surface off with a dry, soft cloth.
If the scanning holder is scratched or damaged, replace it.
You can purchase a scanning holder for A4/LTR-size images. Visit the
Canon Web site to find out about accessories and supplies
(www.ccsi.canon.com).
C
HECK 3 ARE YOU SCANNING THICK PAPER?
The image being scanned must be thinner than 0.25 mm. The thickness
including the scanning holder must be thinner than 0.45 mm.
Note
01-Optional IS-12.fm Page 92 Thursday, April 20, 2000 6:45 AM