Canon CD-4070NW Scanner User Manual


 
Chapter 2. Overview of the CD-4070NW
19
Touch Panel
The document recorder is operated via a touch panel screen. This screen can be operated by lightly touching the
buttons that are displayed on the screen.
NOTE
• Be sure to touch the touch panel only with your fingertip. Do not
touch it with sharp pointed objects, such as your fingernail or a
ball-point pen. Doing so might scratch the screen surface and
cause the screen to malfunction.
•When touching buttons, take care to touch only the required area.
Touching other areas on the screen may cause a malfunction.
•You can use the stands to adjust the angle of the touch panel.
If a screen is not displayed when the power turns ON, or there is
no response by touching the touch panel, push a long, thin object,
such as the tip of 0.04” to 0.06” (1.0 mm to 1.5 mm) dia. gage wire,
into the hole of the reset switch to turn the power OFF, then wait
at least 10 seconds before turning the power back ON.