Filter
Top Products
Chapter 3. Getting Started
21
Turning the Power ON/OFF
The section describes the procedure for turning the power ON or OFF.
Turning the Power ON
When the power is turned ON, the CD-4070NW application automatically starts up.
1
Press the power switch on the touch panel.
The power indicator on the center of the document recorder
lights green, and the document recorder is turned ON.
2
The Startup screen is displayed, followed by the Main
screen.
IMPORTANT
•Do not touch the document recorder or touch panel until the
Main screen is displayed.
• If at least 5 seconds have elapsed after turning the power on
and the touch panel still remains blank, press the reset switch
located at the rear of the toch panel. If after you turn the
power back ON again nothing is still displayed, please
contact your local authorized Canon dealer.
• For explanations of the screens, see to the “CD-R Document
Recorder CD-4070NW Instructions (Software Version).”
Startup Screen
Main Screen