Canon FAX-L2000 Fax Machine User Manual


 
Sending Documents
3-9
3
Basic Operations
Sending Documents
This section explains how to dial a number for faxing.
Using Regular Dialing
When you come to a step that requires dialing a number, you can dial the number with the keys
on the numeric keypad, just like you would when dialing a telephone number. This is called
“regular dialing”.
NOTE
To make dialing easier, register frequently used numbers to the one-touch speed dialing keys or
coded speed dialing codes. (See “Using Speed Dialing”, on p. 3-21.)
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine”, on p. 2-2.
NOTE
You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting
the Scan Settings”, on p. 2-4.)
You can also specify a sender’s name with [TTI Selector]. (See Chapter 3, “Sending
Documents”, in the Facsimile Guide.)
2
Dial the telephone number using the numeric keys.
NOTE
When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
enter the correct digit.
You can also use (Clear) to clear the entire telephone number
start entering the
telephone number again.
If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode
start again.
DOCUMENT READY
4
1
7
5
2
8
6
3
9
0
C