Filter
Top Products
Cutter Unit
Cutter Unit
Cutter Unit ......................................................................................................................................................................... 42
Replacing the Cutter Unit ........................................................................................................................................... 42
Cutter Unit
Cutter Unit
When purchasing, check the Model number.
Shape Model number
CT-06
Note
• For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit."
→
P.42
Replacing the Cutter Unit
Replacing the Cutter Unit
Compatible Cutter Units
For information on compatible cutter units, see "Cutter Unit."
→
P.42
Access the menu for cutter unit replacement
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the Settings/Adj. tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Change Cutter, and then press the OK button.
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
Note
• If you do not respond within two minutes, cutter cleaner replacement is canceled. In this case, repeat the pro-
cedure.
Cutter Unit
iPF8400
Basic Guide
Consumables and Maintenance Cutter Unit
42