Filter
Top Products
3
If no errors are found, the indicator, the indicator and the
selected paper feed indicator light up, and the message
appears on the display when the printer is ready to print.
The information shown on the display is as follows:
Turning Off the Printer
The printer should be turned off as described in the following procedure.
IMPORTANT
•
If the printer is connected to a network, make sure that the printer is not printing data
from another personal computer before turning off the power.
•
If the power is turned off while the
indicator is on, any print data remaining in the
memory of the printer is erased. Press
while offline to output any important print
data, or wait until printing is complete, before turning off the power. (See “Canceling
Printing,” on P. 58)
•
Do not turn off the power to the printer while it is printing.
•
Do not turn off the power to the printer during the self-diagnostic test performed
immediately after the power has been turned on.
•
If the message that the NVRAM is initializing or writing data is displayed, make sure that
the message has been canceled before turning off the power.
•
If the message that the Flash Memory is initializing or deleting data is displayed, make
sure that the message has been canceled before turning off the power.
Ready to print and no
data is being
processed for printing.
Currently selected
paper feed size.