Filter
Top Products
65
<Warning message>
Cause:
Paper in the cassette of the number
indicated on the display has run out.
Remedy:
Load paper into the cassette of the
number indicated on the display.
<Error skip>
Cause:
The paper specified cannot be
duplex printed.
Remedy:
Select the paper source on the
printer with standard-size paper
loaded, and set the paper size
setting on the PC to standard-size.
Then start printing again.
Cause:
The paper type specified cannot be
printed.
Remedy:
Press [
] and the paper will
be printed as plain paper. If the
paper is not plain paper, the data
may not be printed properly.
<Error skip>
Cause:
An error occurred when data was
being transferred between a PC and
the printer.
Remedy:
Check the interface cable connection
and print the data again.
<Error skip>
Cause:
The sizes of the paper loaded in the
paper cassette and paper tray are
different to the paper size settings
specified on the PC or the control
panel.
Remedy:
When paper is being fed from the
paper cassette, make sure that the
size of the paper loaded in the paper
cassette is the same as the paper
size settings for the paper cassette.
Also, when paper is being fed from
the paper tray, make sure that the
size of the paper loaded in the paper
tray is the same as the paper size
settings for the paper tray before you
press [
].
Message
Cause and Remedy