Filter
Top Products
Menu function settings 64
Advanced menu
Inverting the projected image
Home screen > Setup > Advanced >
Projector Position
This function allows you to invert the
projected image so that the image looks correct
when the projector is suspended from a ceiling
or when projecting from behind the screen.
Setting the menu display time
Home screen > Setup > Advanced > Menu
Display Time
If you do not perform any operations on the
OSD, the menu disappears automatically.
This function allows you to set the time before
the OSD disappears.
Front Table Normal projection.
Rear Table Select when projecting from
behind the screen.
Reverses the image from left
to right.
Rear Ceiling Select when the projector is
suspended upside down from
the ceiling behind the screen.
Reverses the image from top
to bottom.
Front Ceiling Select when the projector is
suspended upside down from
the ceiling in front of the
screen.
Reverses the image from left
to right and top to bottom.
5 sec If no menu operations are
performed for the set time, the
menu disappears.
10 sec
15 sec
20 sec
25 sec
30 sec
3 min